 |
The HS-1606VD is a small, easy to operate, bench top steam sterilizer with a 6 litre capacity stainless steel chamber. This model is ideal for small laboratories or health care facilities such as dental surgeries which may have instruments or other items requiring sterilization. This model features three pre-set sterilization cycles which can be easily selected by pressing the ‘prog' button located on the front panel. Each cycle is performed automatically (heating, sterilizing and venting) and a signal sounds to alert the user that the cycle has completed. The front panel has a pressure gauge and LED display to show the current working temperature and error code number should an error occur during operation. User safety is ensured with a door lock system, safety pressure valve and an overheat protection device. |
|
HS-1606VD
|
| Model |
HS-1606VD |
| Overall Size |
350W x 316H x 503D mm |
| Cabinet |
350W x 280H x 417D mm |
| Chamber |
161 dia x 295D mm SUS 316, Volume: 6L, Cylinderical Type |
| Reservoir |
1L Volume |
| Tray |
118W x 20H x 280D mm Qty: 2 Ea. |
| Nett Weight |
25Kg |
| Power Source |
AC230V, 50/60Hz |
| Power Consumption |
1600W |
| Sterilising Agent |
Saturated Steam of Max. 2.1 bar Pressure |
| Air Removal |
Gravity Principle |
| Control |
Full Automated Microprocessor |
| Exposure Temperature |
121°C ~ 134°C |
| Pressure Guage |
Dial type, 760mmHg, -4bar |
|
|
The HS-3041VD is a large bench top steam sterilizer with a 40.5 litre capacity stainless steel chamber, holding two stainless steel trays for the easy storage of items needing to be sterilized. The unit is very well engineered and has been approved by the TGA (TGA approval No. ARTG No. 112473) for safe use throughout Australia. An easy to use control panel located on the front of the unit allows users to change programs, view the drying phase, turn the unit on and off as well as indicators to show the cycle progress and water level. Five pre-set cycle programs are also supplied which have commonly used cycle times and temperatures. This model has a safety door lock which prevents the door from being opened during operation and prevents cycles from starting should the door be left open. An inbuilt safety valve helps protect the chamber should it exceed the standard pressure rating.
An optional applicance table is available (AT-650)
|
| HS-3041VD |
| Model |
HS-3041VD |
| Overall Size |
581W x 468H x 703D mm |
| Cabinet |
581W x 441H x 556D mm |
| Chamber |
300W x 300H x 450D mm SUS 316, Volume: 40.5L, Rectangular Type |
| Reservoir |
238W x 233H x 117D mm / 4L Volume |
| Tray |
291W x 44H x 432D mm Qty: 2 Ea. |
| Nett Weight |
79Kg |
| Power Source |
AC230V, 50/60Hz |
| Power Consumption |
2000W |
| Sterilising Agent |
Saturated Steam of Max. 2.1 bar Pressure |
| Air Removal |
Gravity Principle |
| Control |
Full Automated by 8 bits Microprocessor |
| Exposure Temperature |
121°C ~ 132°C |
| Timer Range |
0 ~ 60 Min. |
|
 |
The HS-3041V steam sterilizer is similar to the above HS-3041VD however it features an advanced controller with a front LCD display panel. The LCD message centre displays the sterilizing temperature, drying time, current temperature and pressure, running procedure, actual time, door status, cycle number, error messages and indicates the reservoir water level. This model is also equipped with a printer which prints out all important reference data. The unit has a large 40.5 litre capacity stainless steel chamber, holding two stainless steel trays. Five pre-set cycle programs are available all selectable via the front controller. This model has been approved by the TGA (TGA approval No. ARTG No. 112473) for safe use throughout Australia.
An optional appliance table is available (AT-650) for easy moving of the unit.
|
| HS-3041V |
| Model |
HS-3041V |
| Overall Size |
614W x 489H x 804D mm |
| Chamber |
300H x 300W x 450D mm, Volume 40.5L, SUS 316 |
| Reservoir |
Volume: 3.0L |
| Tray |
291W x 44H x 432D mm, Qty: 2 Ea. |
| Pressure Gauge |
Dial Type, 0~4 Bar |
| Temperature Sensor |
Pt100 (DIN) |
| Nett Weight |
91Kg |
| Power Source |
AC 230V, 50Hz |
| Power Consumption |
2000W |
| Sterilising Agent |
Saturated Steam Max. 2.1 bar Pressure. |
| Air Removal |
Vaccum / Gravity |
| Vacuum Pump |
Flow rate: 11L/Min |
| Controls |
Microprocessor |
| Exposure Temperature |
121°C ~ 134°C |
| Display |
168x128 dot graphic display, LCD |
| Printer |
Dot matrix 40 colum, single colour, paper roll |
|
|
|
This vertical type steam sterilizer has a cylindrical chamber which is 60 litres in capacity. This unit is very effective for sterilizing liquids, culture medium or large pieces of
glassware. It is supplied with with two cylindrical stainless steel baskets for the safe and easy storage of items. The unit has a heavy duty swing out door with a turn lock. Five preset cycle programs are also supplied which have commonly used cycle times and temperatures. |
| HS-60VD |
| Model |
HS-60VD |
| Overall Size |
575W x 1080H x 531D mm |
| Cabinet |
575W x 807H x 494D mm |
| Chamber |
340ø x 723H, SUS 316, Volume 60L, Cylindrical, Vertical Type |
| Reservoir |
238W x 233H x 117D mm, Water Cap. 4L |
| Basket |
300ø x 310H mm, Qty: 2 Ea. |
| Nett Weight |
98Kg |
| Power Source |
AC 230V, 50/60Hz |
| Power Consumption |
3000W |
| Sterilising Agent |
Saturated Steam of Max. 2.1 bar Pressure |
| Control |
Full Automated by 8 Bits Microprocessor |
| Exposure Temperature |
121°C ~ 132°C |
| Timer |
0 ~ 60 Min. |
| Pressure Gauge |
Dial Type, 0 ~ 4 bar |
| Castor |
4 Ea., 50mmø, Swivel, w/Brake |
|
 
|
Appliance table for easy mobility of your steam sterilizer. Available in two sizes.
| Model |
-470AT |
-650AT |
| |
510Wx764Hx510Dmm |
690W x 764H x 760D mm |
| Structure |
Carbon steel, 2 shelves, 50mm casters |
Carbon Steel, 2 Shelves 50mmø Castors |
| Suits model |
HS-1606 |
HS-9041, HS-3041V |
|
| AT-650 AT-470 |
|
 Click to download PDF Product Sheet
|
